EXAIR’s Digital Flowmeter is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used downstream. This makes it possible to save thousands of dollars per year in compressed air waste – helping to identify costly leaks or inefficient air products.

The Digital Flowmeter has an LED display that directly indicates the SCFM or m3/hr volume of airflow through that pipe. Models from 1/2″ to 4″ iron pipe are in stock. Each Digital Flowmeter is calibrated for the specific pipe size to which it is mounted. Is designed for permanent or temporary mounting to the pipe.  The unit seals to the pipe once the two clamps are tightened.

%

EXACT

%

DIGITAL DISPLAY

%

OPTIMAL

Positive turning inserts

Digital Flowmeter

The Digital Flowmeter is economical, and can save a large amount of money by identifying excessive leaks and waste air products.

TCGT 110204FN-ACB

Digital Flowmeter

Many companies install the Digital Flowmeter on each major leg of their air distribution system to constantly monitor and reduce compressed air usage. It requires the user to drill one or two small holes through the pipe using the included drill bit and locating fixture.

  • RELIABLE 100%
  • ACCURATE 100%
  • EFFICIENT 100%
WNMG 060404EN-AQ

Digital Flowmeter

The two flow sensing probes of the flowmeter are inserted in these holes. No cutting, welding, adjustments or calibration are ever required. If the unit needs to be removed, blocking plates are available. NEMA 4 (IP66) meters available. Consult the factory.

%

ACCURACY OF MEASUREMENTS

TCGT 110204FN-ACB

Digital Flowmeter

The Digital Flowmeter is designed for permanent or temporary mounting to the pipe. Is easy to install, no moving parts, sensitive at low flows, summing remote display and data logger is available, no calibration or setup required.

ACCURACY

5% of reading, plus 1% of full scale for air temperatures between 40º to 120ºF (4º to 49ºC)

operating pressure

30 to 140 PSIG for best accuracy – 200 PSIG max.

wetted materials

Stainless steel, gold, thermal epoxy and Viton (seal)

compliance

CE and RoHS

Go to the EXAIR Corporation website for more information

More information